EXC-350 MICROSCOPE SERIES
ACCU-SCOPE
®
10
ASSEMBLY
(continued)
LED Illuminator
IMPORTANT: The LED illuminator bulb is
pre-installed. These instructions are only
necessary should the need arise for a
replacement lamp.
Align the orientation pin
①
and power pin
②
on the light source to the oriented holder
③
and
power socket
④
, then push the light source in
until it is flush (see Fig. 4).
Connecting the Power Cord
IMPORTANT: Use care when storing the
power cord so that it does not bend or twist.
Make sure the power switch is at “0”(OFF)
before connecting.
Insert the connector
①
of power cord securely
into the power socket
②
, (see Fig. 5).
Insert the other connector securely into an
electrical outlet.
The microscope uses a universal power
supply so it may be used in any voltage
range between 90 ~ 240v when used with the
appropriate line cord.
An optional cord hanger can be installed on
your microscope for simple and easy
storage.
(see Photos 1 & 2)
Fig. 4
Photo 1
Optional
Cord Hanger
Photo 2
Optional
Cord Hanger
Shown
With Cord
Fig. 5
①
③
②
④
①
②
Summary of Contents for EXC-350-PH
Page 2: ......
