3075 STEREO MICROSCOPE
ACCU-SCOPE
®
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 12
ADJUSTMENT
AND OPERATION
(continued)
Trinocular Viewing Head
Mounting the Camera (Fig. 9)
The c-mount adapter is shipped assembled and
separate from the microscope.
Mount the camera by screwing the threaded
end
3
of the c-mount adapter into the camera
first. Insert the camera and adapter into the hole
in the top of the viewing head and tighten the
lock screw
2
.
Selecting the Light Path (Fig. 10)
To view through the binocular head only, slide
the light path selection lever
1
to “OUT”.
To view through the binocular/trinocular head,
slide the light path selection lever
1
to “IN.”
Make sure to move the lever all the way to the
“OUT” or “IN” position.
Adjusting the Image (Fig. 10 & 11)
Slide the light path selector level
1
to the “IN”
position. Turn the zoom knob to the maximum
magnification, observe through the camera and
adjust the focusing knob to make the image
clear. Turn the zoom adjustment knob to the
minimum magnification. If the image is not
clear, turn the adjustment ring
2
on the c-mount
adapter until it is clear.
Repeat the process until the image is clear
within the entire zoom range.
Fig. 9
Fig. 10
Fig. 11
