Accu-Chek Solo User Manual Download Page 8

Page: 8 / 66

Scope of delivery

The starter kit contains the following system components:

Accu-Chek Solo pump base (2×)

Accu-Chek Aviva Solo diabetes manager (1×)

Rechargeable battery for the Accu-Chek Aviva Solo
diabetes manager (1×)

Accu-Chek Solo insertion device (1×)

Charger with plug (1×)

USB cable (1×)

Accu-Chek Solo carry case (1×)

Finger pricker (1×)

Lancet drums for finger pricker (2×)

Instructions for use

Not included, but necessary for using the micropump system:

Accu-Chek Solo reservoir assemblies

Accu-Chek Solo cannula assemblies and Accu-Chek Solo
micropump holders

Supplies

Only use supplies from Roche.

Note

To perform blood glucose tests and control tests with the
Accu-Chek Aviva Solo diabetes manager, you need the
Accu-Chek Aviva test strips and the Accu-Chek Aviva control
solution.

Pump base

Diabetes manager

VIII

man_07866364001_A_en.indb 8

28.07.2017 12:15:43

Summary of Contents for Solo



































































Search results

Summary of Contents for Solo

Reviews:

Accu-Chek Solo, User Manual, Page: 8 / 66

Search results

Summary of Contents for Solo

Reviews: