Note:
Check the expiry date on the test strip bottle. Do not use expired test strips.
Please refer to User Manual booklet for more information.
Quick Guide for Accu-Chek Performa blood glucose monitoring (bGM) system
Testing blood glucose in 4 simple steps
Changing battery
Open the battery door on the back of the meter by
pushing the tab in the direction of the arrow and
pulling the door up.
Remove the old battery. Insert the new battery
(3 volt lithium battery, coin cell type
CR2032
)
with the
(+) side facing up
. Put the battery door
back in place and snap it closed.
Viewing test results in memory
Test strip storage
With the meter turned on or off, press and release
or
to enter memory. The most recent test
result appears on the display.
Close the lid immediately after removing a
test strip from the bottle. Keep in cool
and dry area.
The test result appears on the display in
approximately 5 seconds. The meter turns
itself off after the test strip is removed.
Apply a drop of blood to the
front edge of the
yellow window
of the test strip. Do not apply
blood on top of the test strip. The meter beeps
when there is enough blood in the test strip.
Insert the test strip into the meter in the direction
of the arrows. The meter turns on automatically
and beeps.
A test strip symbol and a fl ashing blood drop
symbol appear on the display.
The meter needs little or no maintenance with
normal use. If you encounter any suspicious blood
glucose reading, perform a control test.
Cleaning the meter
Do
•
Ensure that meter is turned off.
•
Gently wipe the meter’s surface with alcohol
swab (wring out any excess liquid).
Meter maintenance
Do Not
•
Allow any liquid to enter the slots in the meter.
•
Spray cleaning solution directly onto the meter.
•
Immerse the meter in liquid.
3
2
4
1
2
1
