Accu-Chek Nano, Owner'S Booklet

Page: 34 / 204

32
8. Gently squeeze your finger to
assist the flow of blood. This
helps you get a blood drop.
9. Touch the blood drop to the
front edge of the yellow
window of the test strip. Do
not put blood on top of the
test strip.
The meter beeps
and flashes when there is
enough blood in the test strip.
The result appears on the
display.
10. If you want to mark the test
result with a pre‑meal, post‑
meal, or general marker,
leave the test strip in the
meter. See Chapter 3,
Marking Test Results and
Setting the Post‑Meal Test
Reminder. Otherwise, discard
the used test strip. After a
successful test, the meter
turns itself off 5 seconds after
the test strip is removed.
WArning
if mg/dL does not appear with the test result, contact the ACCU‑CHEK Customer Care Service
Center at 1‑800‑858‑8072. Use of the wrong unit of measure may cause misinterpretation of your
actual blood glucose level, and may lead to incorrect treatment.