![background image](http://html.mh-extra.com/html/accu-chek/inform-ii/inform-ii_operators-manual_455945043.webp)
Powering Up and Entering an Operator ID •
2
43
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
If wireless connectivity is activated, the
(
RF OFF
)
icon is displayed as a button in the
Power Up
screen.
■
To temporarily
disable
the wireless network con-
nection, touch
(
RF OFF
) in the
Power Up
screen. The icon then changes to
(
RF ON
).
■
To temporarily
enable
the wireless network con-
nection, touch
(
RF ON
) in the
Power Up
screen. The icon then changes to
(
RF OFF
).
The
RF ON/RF OFF
button always displays the
option
you
currently have. The current communication
status
is dis-
played in the status bar (bottom line) of the display in all
menus and screens.
■
The icon is displayed, if wireless connectivity is
enabled. Signal strength is shown by 4 bars next to
the icon in the status bar. Signal strength can
range from “poor”
to “excellent”
.
■
The
icon is displayed if the last attempt to com-
municate with the data management system was
successful and was terminated according to the
communication protocol.
■
The
icon is displayed if the last attempt to
communicate with the data management system
was not successful or was unintentionally termi-
nated. If this icon persists, contact your system
administrator. Ignoring this information may lead to
a
Download Lockout
The signal strength bars are only displayed when wire-
less communication is actually taking place. For example,
since wireless communication never takes place when a
test is being run on the meter, no status bars will be
displayed.
Contrast
Power Up
12:48 pm
03/17/17
Contrast
Power Up
12:48 pm
03/17/17
Summary of Contents for Inform II
Page 3: ...08424705001 01 2017 04 USA Operator s Manual Version 6 0 A ACCU CCU CHEK HEK Inform II System ...
Page 245: ...245 Notes ...
Page 246: ...246 Notes ...
Page 247: ...247 ...