![background image](http://html.mh-extra.com/html/accu-chek/inform-ii/inform-ii_operators-manual_455945042.webp)
42
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Adjusting the display
Using the
Display
options, you can adjust the display con-
trast to the ambient light conditions.
1
In the
Power Up
screen, touch
Contrast
. The
Display
screen appears.
2
Touch
or
to make the display lighter or
darker.
3
Touch
to confirm the setting.
Enabling/disabling wireless
connectivity
If the meter supports wireless connectivity, you can tem-
porarily enable or disable this functionality as required.
Wireless connectivity is automatically reactivated the next
time you power on the meter. You can then disable it
again temporarily, if required.
After 30 seconds without any activity (e.g., without a
screen touch) the meter automatically dims the display
backlight to conserve energy (“Low Power Mode”).
Display
Lighter
Darker
12:48 pm
03/17/17
WARNING
If you suspect that the RF emissions of wireless commu-
nication are harming the patient or affecting other
devices, you should carefully reassess the appropriate-
ness of continued use of the WLAN functionality of the
Accu-Chek Inform II system using the guidelines of your
facility.
Summary of Contents for Inform II
Page 3: ...08424705001 01 2017 04 USA Operator s Manual Version 6 0 A ACCU CCU CHEK HEK Inform II System ...
Page 245: ...245 Notes ...
Page 246: ...246 Notes ...
Page 247: ...247 ...