Fast EtherHub-8s User’s Guide
D-2
Regulatory Standards Compliance
Warnings 1. Wear an anti-static wrist strap or take other suitable measures to
prevent electrostatic discharge whenever handling this equipment.
2. When connecting this hub to a power outlet, connect the field ground
lead on the tri-pole power plug to a valid earth ground line to prevent
electrical hazards.
You may find the following booklet prepared by the Federal Communications
Commission helpful:
The Interference Handbook
This booklet is available from the U.S. Government Printing Office. Washington, D.C.
20402. Stock No. 004-000-00345-4.
Note:
In order to maintain compliance with the limits of a Class B digital device, Accton
requires that you use a quality interface cable when connecting to this device. Changes
or modifications not expressly approved by Accton could void the user’s authority to
operate this equipment. Suggested cable type is
: 100
W
Category 5 STP or UTP
VCCI Class B compliance
This product also complies with CISPR22 Class B (EN55022 Class B).
EN55022 Declaration of Conformance
This is to certify that the Accton Ethernet Hub is shielded against the generation of radio
interference in accordance with the application of Council Directive 89/336/EEC,
Article 4a. Conformity is declared by the application of EN55022:1987 Class B
(CISPR 22:1985/BS 6527:1988).
Compliance with the applicable regulations is dependent upon the use of shielded
cables.
