14
2. Type
cmd
in the text book and click
OK
.
3. A command window will show and in the window type
ipconfig /all
and then press
enter
key.
4. In the command window will show the IP address, Subnet Mask, Default Gateway…..etc.
information. The IP address should be
192.168.1.xxx
,
xxx
is a value other than 254
from 0 to 255, and the Subnet Mask should be
255.255.255.0
while the default gateway
should be
192.168.1.254.
5. If the IP address of your PC is not correctly configured, please follow the steps described
above to re-configure the IP address of your PC.
You can further check the connection between your PC and the Smart Router by
ping
command. Following the steps below are for
ping
command.
1. Also in the command window, type
ping 192.168.1.254
and then press
enter
key.
2. If the window shows: