Page - 8
Connecting Your Concerto
The following steps will assist you in correctly connecting your
Concerto.
A. Connect the firing cable to the bottom of the Concerto and to the
generator connector labeled "accordion"
B. Connect the volume pedal to the generator jack labeled "pedal 1"
C. Connect the four way foot pedal to the generator jack labeled
"pedal 2"
D. Connect the power supply to an electrical outlet and then to the
generator jack labeled “power"
E. Connect the audio cables to the stereo left and right outputs of
the generator, then to two channels on the amplifier. It is
important that both channels used on the amplifier have the
same settings.
F. Power up the Concerto
G. Turn on the amplifier (to prevent popping in the speakers turn
the amplifier off before turning off the rest of the equipment)
H. Adjusting the volume: With the expression pedal in the
maximum position (all the way down) and the Concerto's
volume at the 3 O'clock position gradually raise the volume on
the amplifier until you are at the loudest forte you desire. The
expression pedal will now provide a full range of volume
from zero to full volume.