Necessary Tools
1.
2.
#2 Phillips Screwdriver
Disassembly of the shredder is described in the following steps.
Bottom Housing Removal
WARNING!
Disconnect the unit from the receptacle before performing any
disassembly procedures.
1.Unplug the power cord from the outlet power supply.
2.Open cabinet door and remove the 5 philip head screws that
secure shredder head to cabinet base.
3.Remove shredder head from cabinet by sliding it towards you.
Lay the unit upside down with the back of the head facing up.
4.Remove the e l e v e n phillip head screws supporting the
bottom housing
5.Flip unit over so top housing is facing up. Remove top cover.
1.Complete Section, Bottom Housing Removal.
2.Remove the capacitor and six phillips screws that attach
main board to bottom housing.
3.Remove the four philip screws that secure the cutting head
to the bottom base.
4.Remove the ground wires from the right hand side frame.
4.Carefully rotate the complete cutter assembly toward you and
place the underside of the cutter assembly on your work area.
Troubleshooting
Adjustable wrench
Also disconnect any wires from main board that are mounted
to cutting head assy.
8
