![background image](http://html1.mh-extra.com/html/acco-brands/64614a/64614a_user-manual_455616017.webp)
Operating
17
Engl
is
h
4
Operating
This chapter describes the function of the controls and indicators, the operating modes, how to set
up and operate the machine and a number of applications. The sections in this chapter are placed in
a sequence in which the information is needed for laminating processes. For the mounting process
the sections 4.3 and 4.4 can be skipped with the exception of setting the pressure (see section
4.4.5).
4.1
Process controls
This section gives an overview of the functions of the controls on the control panel (7) and
elsewhere on the machine (Figure 8).
Note:
Switch on the heat assist approximately 15 minutes before use, if a process requires the
rollers to be heated, close the nip and run the machine at low speed to avoid uneven hot spots.
4.1.1
Control panel
This paragraph describes the controls and indicators on the control panel.
Figure 8: Control panel
Control ON/OFF (1),
toggle pushbutton and standby or ON indication LED;
Press the switch 1 second to switch the machine from stand by to active and back.
The LED flashes when the machine is in stand-by mode.
WARNING:
THE MACHINE IS CONSTANTLY POWERED WHEN THE POWER CORD
IS PLUGGED IN.