Acclaim Lighting Dyna Graze HO Exterior DMX, User Manual

Page: 10 / 20

8
www.acclaimlighting.com
Power and control wiring
Power and control are combined within the IP67-rated feed
cables cords. Input and output connectors are FINEcables® M20
(3+5P), with a male input connector located at one end and
female output connector at the other. Connector placements
are such that abutted units can be directly connected without
need for extra cables.
The cable color designations for the optional feed in cable are
as follows:
Power
The power requirements are as follows:
•
Voltage: 100-277VAC 50/60Hz
•
Power: 20W per 1’ section (80W for a 4’ model)
Control
The control links use three cores for the DMX512 / RDM connections.
FINEcables® M20
(3+5P) male
Making a temporary control link
Each XMT-350 DMX/RDM tool is supplied with a 5-pin male XLR lead that can be used to
make a temporary control input link with the Dyna Graze feed-in cable. Use wire nuts, conn
blocks or Wago® connectors to temporarily join the two cables:
Dyna Graze
feed in
cable
Male XLR
lead