Acclaim Lighting AQUA DRIVER 400, User Manual

Page: 15 / 24

13
www.acclaimlighting.com
POWER INPUT
The fixed power cord is supplied as standard with US color coding and bare tails. For
international installations, wire according to local codes.
Power cord colors
The red front panel indicator will illuminate when power is applied. The other two indicators
located just below the power indicator are not used.
IN-RUSH CURRENT
The Aqua Drivers use switched mode power supplies which exhibit a trait known as
‘in-rush current’ when they are first powered on. This is caused by the various capacitive
components initially topping themselves up with power. The in-rush current period lasts
only milliseconds, however, if you are using multiple units on a single supply, ensure that the
breakers used are rated to support inrush currents without tripping during startup.
The Aqua Driver power requirements are as
follows:
•
Voltage: 100-277VAC 50/60Hz