15
www.acclaimlighting.com
Standalone mode: OFF
9
6
8
10
7
ON
STANDALONE MODE USING INTERNAL CHASE PROGRAMS
In standalone mode, all four ports are treated as one group.
Note: all switch settings can be
changed when the driver is off or on
. To configure the Aqua Driver for standalone chase mode
you need to:
1 On the 10-way switch block, set switch 10 OFF to
choose standalone mode.
Fade time
3
2
4
1
Program
9
6
8
10
7
ON
Speed
6
3
5
7
4
2 Use switches 1 to 3 of the 10-way switch block to
choose the required fade time between chase steps.
If all three switches are OFF, the chase states will snap
between each other. All three switches ON will produce
the smoothest fade
(Note: switch 3 is weighted as the
most significant bit)
.
3 Use switches 4 to 6 of the 10-way switch block to
choose the required speed of chase. If all three switches
are OFF, the chase will run at its fastest speed, with 0.1
seconds between steps.
4 5 6
Speed
OFF OFF OFF
0.1
seconds
ON OFF OFF
0.2 seconds
OFF ON OFF
0.5
seconds
ON
ON OFF
1 second
OFF OFF
ON
5 seconds
ON OFF ON
10
seconds
OFF
ON
ON
20 seconds
ON
ON
ON
30 seconds
4 Use switches 7 to 9 of the 10-way switch block to
choose the required program. If all three switches
are ON, an Auto mode will cycle between all of
the available programs.
Summary of Contents for AQUA DRIVER 400
Page 1: ...User guide Aqua Graze...
Page 2: ......
Page 22: ...20 www acclaimlighting com DIMENSIONS AQUA DRIVER 400 Weight 4 4 lbs 1 99 kg...
Page 24: ...www acclaimlighting com...
