Acclaim Lighting AL Graze AC 2700K white, User Manual

Page: 6 / 20

4
www.acclaimlighting.com
INSTALLATION
When installing each AL Graze AC fixture, ensure that the surface is level and that nothing
is protruding to damage the mounting bracket(s). Suitable mounting surfaces include steel,
aluminum, concrete or wood structures.
Each mount bracket has two slots measuring 0.35” x 0.16” (9 x 4mm) and the base has a
thickness of 0.14” (3.5mm). Select bolts or screws (not supplied) that fit the mount bracket
base(s) correctly and are particularly suited to the mounting surface.
Ensure that each mount bracket is securely fixed to the mounting surface with appropriate
screws/bolts. If necessary, use a 1/16th (1.5mm) Allen wrench to loosen each mount bracket
to allow them to slide along the length of the fixture to the required position before re-
tightening.
Note: It may be necessary to temporarily remove the mounts from the AL Graze AC unit in order to
fix them to the surface. See page 5 for details.
MOUNT ADJUSTMENT
The two standard swivel mount bracket(s)
supplied attached to each AL Graze AC fixture
allow tilt angles, in both directions, of roughly
30 degrees from vertical to be achieved. Use
a 1/16th (4mm) Allen wrench to adjust the tilt
angle.
Replacement flat brackets are also supplied
with each fixture. See page 5 for details.
Tilt adjustment
(3/16th / 4mm Allen wrench required)
Slide adjustment
(1/16th / 1.5mm Allen wrench required)
30
O
30
O