4. Description of the product
4.1. The main elements of the engraver are shown in Fig. 1
1 – Collet clamping nut
2 - Shaft lock button
4
- Speed indicator
4 - Power button / speed switch
5- Charging connector
4.2 The engraver with a set of accessories in a case is shown in Fig. 2
1 - engraver
2 - a set of tools and accessories
3 - charger
This engraver with a set of accessories allows you to perform a wide range of work on hard and soft materials: cutting,
grinding, polishing, engraving, drilling, cleaning.
5. Safety
5.1 You must use the engraver only in accordance with the purpose indicated in the manual.
5.2 When operating it is necessary to comply with all the requirements of this manual, handle the engraver carefully, do not
expose it to shocks, overloads, or dirt.
5.3 The use of a rechargeable battery ensures maximum electrical engraver safety without the use of personal protective
equipment and grounding devices.
5.4 During the work of the engraver, the following rules must be observed:
- use personal protective equipment. Use a face shield or goggles depending on the type of operation. If necessary, use a
respirator, hearing protection, protective gloves or a special apron that protects you from abrasive particles of the processed
material. Eyes must be protected from foreign shredding flying in the air, produced during various operations;
- the outer diameter and thickness of the bit supplied with the tool must correspond to the dimensions of the collet chuck of
your power tool;
- the allowable number of revolutions of the working tool must be no more than the maximum number of revolutions
indicated on the engraver;
- use clamping devices to fasten the workpiece;
- keep your hands at a safe distance from the rotating bit;
- it is forbidden to put down the tool when the electric motor is running and before the moving parts stop;
- in no case do not tie the key for clamping the collet chuck to the tool with wire, twine, etc.;
- do not place the power tool on a dusty surface, dust particles may get inside the mechanical part of the power tool;
