Switching On
Press and hold the
(1) power button
for 3-5 seconds. You will hear a beep and the
(4) LED indicator
will blink blue. This indicates that the device is powered on.
Switching Off
Press and hold the
(1) power button
for 3-5 seconds. You will hear a beep and the
(4) LED indicator
will blink red. This indicates that the device is powering off.
*The headset will switch off automatically in order to save power if no device is con-
nected within 5 minutes.
How to enter Pairing Mode
Make sure the headset is off. Press and hold the
(1) power button
for 5-7 seconds.
Release when you see the
(4) LED indicator
alternate between red and blue.
Pairing the headset with Bluetooth mobile phone
Please make sure that your mobile phone has Bluetooth capability. Keep the
headset and mobile phone within 1 meter when pairing. Enter pairing mode
on the headset (Please refer to “How to enter pairing mode”). Switch on the
Bluetooth function of your mobile phone and search for Bluetooth devices. After
the phone completes its search, select “GG-AUDIO” in the Bluetooth device list.
If prompted, type “0000” as the password or PIN number and press “Yes” or “Con-
firm.” After successfully pairing, select “GG-AUDIO” in the Bluetooth device list and
press “Connect.” Once the headset is successfully paired and connected, the
(4)
LED indicator
will blink blue twice every 4 seconds.
*Specific pairing procedures may vary with different mobile phones. Please refer to
your mobile phone manual for further information.
Switching the AudioActive on/off
Pairing the AudioActive with Bluetooth devices
