Pairing your mobile Bluetooth device to the BlueBar
Pairing instructions may diff er depending on the device you are using. Please
refer to your device’s user manual for further information.
1- Make sure that your mobile device is within at least 3 feet of the
BlueBar
when
trying to pair.
2- Start with the
BlueBar
turned OFF. Press and hold the
(2) Power/Play button
until the
(1) Power LED indicator
fl ashes alternating red and blue. The
BlueBar
is
now in PAIRING MODE.
3- Access the Bluetooth settings in your mobile device and select SEARCH/SCAN
FOR DEVICES. Your mobile device will begin to search for a Bluetooth signal.
4- You will see the name
BLUEBAR
appear in the device list. Select it to pair, and
if a password or PIN is needed enter the numbers “0000”. ***You may have to then
select
BlueBar
and press “CONNECT”.
5- After a successful connection has been made, you will hear a short tone and
the
(1) Power LED Indicator
will begin to fl ash blue.
Playing music
1- Make sure that your Bluetooth A2DP enabled device is paired with the
BlueBar
.
2- Simply begin playing music on your device and you should hear the music
play through the AudiOHMs. Adjust volume, using the
(3) /- buttons.
3- You can control music playback via the
BlueBar
with any AVRCP (audio/video
remote control profi le) enabled device. To play or pause briefl y press the
(2) Power/Play button.
You can control track playback with the
(4) Forward/Back
buttons.
Hands-free calls
The BlueBar is equipped with a
(7) Microphone
for hands-free calling. When
receiving a call you will hear a tone through your headphones.
1- Answer a call- Press the
(2) Power/Play button
2- End a call- Press the
(2) Power/Play button
3- Reject an incoming call- Press and hold the
(2) Power/Play button
for 2 seconds
4- Redial last number called- Press and hold the
(2) Power/Play button
2 seconds
Operating Instructions
(continued)
:
