Opening your life
3
2.4 Cable Connection
Penix 600 - 601 is required to connect two cores wire, which requires very low voltage and non-professionally trained personnel is
required in installation; however, the users are advised to read this installation manual carefully before installation. After decided
the position of all accessories, please starting from cable conduit arrangement to prevent the cables from being broken or dama-
ged
2.5 Power Connection
1. The installation of power supply cable to the control box should be carried out by a qualified professional electrician.
2. Please make sure to shut off the power before installation or maintenance.
3. Installation
3.1 Preparation for Motor Installation
Check the following items before going for installation:
1). Make sure the weight and dimensions of gate conform to the operation range of Penix 600 - 601. Don’t use Penix 600 - 601 if the
gate specifications did not meet the requirements.
2). Make sure the gate structure conform to the criteria of automatic operation and force regulations.
3). Make sure there is no serious friction existing in the opening or closing travel of the gate leaves.
4). Make sure the gate is at horizontal level that the gate will not move aside at any position.
5). Make sure the gate can bear the impact of the motor torque when it is installed on any hole of the bracket which the surface is
sufficiently sturdy.
6). Make sure the photo sensors are installed on flat surfaces to ensure the two ends of receiving and transmitting corresponded to
each other.
7). Check the dimensions of the motors as below.
Summary of Contents for Fenix 600
Page 21: ...Opening your life...
