AccessECU WRX 2002, User Manual, Page: 41 / 70

41
AccessPORT Communication AccessPORT Communication
AccessPORT Communication AccessPORT Communication
AccessPORT Communication
Before you can transfer files to or from the AccessPORT, you must first connect
to the AccessPORT using the Map Manager software. When the software first
starts, it will ask you if you’d like to connect. If you select No, you will be
working in Off-Line mode and no transfers to/from the AccessPORT will occur.
If you wish to Connect to the AccessPORT after the software has been loaded,
you may do so by selecting the AccessPORT -> Connect to AccessPORT
AccessPORT -> Connect to AccessPORT
AccessPORT -> Connect to AccessPORT AccessPORT -> Connect to AccessPORT AccessPORT -> Connect to AccessPORT from
the main application menu.
Once connected, the Status line will state “Connected to AccessPORT”. A
check-mark will also appear in the AccessPORT menu option for “Connect to
AccessPORT”. Please note that the AccessPORT must be in the “Sync to PC”
mode with “Waiting for PC” displayed on the screen. You must also verify you
are only using the supplied cable as a standard Serial cable will not work.
If you wish to disconnect from the AccessPORT, you may do so by selecting the
AccessPORT -> Connect to AccessPORT
AccessPORT -> Connect to AccessPORT
AccessPORT -> Connect to AccessPORT AccessPORT -> Connect to AccessPORT
AccessPORT -> Connect to AccessPORT from the main application menu. The
Status line will show you are disconnected and no Map file transfers to or from
the AccessPORT will be supported.