Access Virus Rack XL, User Manual

Page: 89 / 194

ACCESS VIRUS RACK XL OS5
89
Delay/Reverb
PDF VERSION - RESTRICTIONS APPLY
MODE
Here’s where you select the algorithm for the
DELAY/REVERB section.
Let’s take a tour of the different algorithms:
- OFF Not surprisingly, this setting deactivates
the DELAY/REVERB section.
- DELAY Mono echo. Same delay time on the
left and right sides.
- REVERB Room simulation.
- REV+FEEDB1 This the Virus' trademark
room simulation. Here you can use the FEED-
BACK control to generate pre-delay feed-
back. The feedback effect generates rhythmic
repetitions of the REVERB signal, which are
repeated at the intervals determined by the
assigned pre-delay time.
- REV+FEEDB2 Room simulation with feed-
back and REV+FEEDB1. Here the REVERB
signal is audible immediately after you hear
the dry signal rather than after a defined
amount of pre-delay time has elapsed. The
rhythmic repetitions are independently varia-
ble depending on the pre-delay time and
feedback intensity (FEEDBACK).
01111111111111111112
1 DELAY/REVERB
MODE REVERB≤
61111111111111111154
The following parameters will only appear in
the display when you’re working with DELAY al-
gorithms.
DELAY CLOCK
When you set it to OFF, the absolute delay time
is determined in milliseconds. If you select a
note value, then the delay time is set to the val-
ue of this note. The absolute length of this note
value depends on the value entered to CLOCK
TEMPO in the global clock generator (refer to
this section). In this case, the absolute delay
time in milliseconds is ignored.
01111111111111111112
1 DELAY
Clock Off≤
61111111111111111154
DELAY COLOR
A filter is placed in the delay effect's output,
that also effects the feedback path. It can be
faded between a Lowpass (negative range) and
a Hipass (positive range). The filter causes the
delay repeats to become duller and duller, just
like on a tape echo, or for a nice unnatural ef-
fect, to become thinner with increased harmon-
ics (Hipass).
01111111111111111112
1 DELAY
Color +10≤
61111111111111111154
DELAY SHAPE
Determines the waveshape of the Delay LFO.
You can select from among 6 waveshapes.
01111111111111111112
1 DELAY
Shape 1≤
61111111111111111154