manualshive.com logo in svg

Access VIRUS C SERIES, User Manual

Share
Download
Access VIRUS C SERIES User Manual Download Page 96

94  CHAPTER 16

The Parameters

OSC SECTION (ENCODER)

The following section lists all parameters 
in the Virus, each with a brief definition 
or explanation.

. 

In case, a parameter is only available 

in the Expert Mode, the prefix [XP] has 
been used in front of the parameter’s 
name.

The function of the Encoders depends on 
the selected section and the currently 
active display menu. If the given Encoder 
does not have an assignment, the corre-
sponding LED on the front panel will 
extinguish. If no menu is activate (none 
of the seven section LEDs is illuminated), 
then the Encoder assignments are deter-
mined by the Edit section.

EXPERT MODE: The Virus Rack features 
numerous parameters. Many of these 
you can occasionally do without because 

they are not absolutely essential to basic 
sound programming, and they do tend 
to make the device a little more chal-
lenging to handle. EXPERT mode can 
solve this problem. It lets hide and show 
rarely used parameters in the display 
menus. In the chapter "The Parameters", 
those parameters that belong to EXPERT 
mode are labeled (XP). When EXPERT 
Mode is switched to "Off", then those 
parameters are hidden.

Summary of Contents for VIRUS C SERIES




































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands