6
POWERKIT Installation and User Guide
CHANGING SETTINGS
Easily change the battery parameters using the following steps.
Step 1:
On AssetPro application, navigate
to “Configuration”
→
Settings using side bar.
Step 2:
Select the unit you wish to edit and click ‘Filter’.
Step 3:
Change the Voltage and AH Capacity of the battery.
Step 4:
Select ‘Alarm’ tab and change Over/Low voltage alarm thresholds.
a. Over Voltage = max charge voltage per cell multiplied by the # of cells.
b. Low Voltage = min charge voltage per cell multiplied by the # of cells.
Step 5:
Select
the “Charging Profile” tab.