background image

www.AccessOneTechnologies.com 

I

MPORTANT

 U

SER

 I

NSTRUCTIONS

Automatic gate systems provide user convenience and limit vehicular traffic.  Because these systems can 

produce high levels of force, it is important that you are aware of the potential hazards associated with the 

system.  Potential hazards may include pinch points, entrapment positions, lack of proper pedestrian 

access, blind spots for traffic visibility. 
 

It is the joint responsibility of the designer, purchaser, installer and end user to verify the system is properly 

configured for its intended use.  Be sure that the installer has instructed you on the proper operation of 

 the gate and gate system before use.  Be sure the installer trains you about the basic functions of the 

required reversing devices associated with the gate system and how to properly test them.  Reversing 

devices may include reverse loops, sensing edges, photoelectric cells, inherent reverse detection, and/or 

other external devices. 
 

R

ESTRICTIONS

 & W

ARNINGS

1.  A moving gate can cause serious injury or death.  Read and follow all installation manuals, reference manuals, and 

warning label instructions. 

2.  Vehicular gates are for vehicles only.  Pedestrians must use a separate entrance.  Keep all pedestrian traffic away from 

any vehicular gate.  No one should cross the path of a moving gate. 

3.  Never allow children to operate or play with gate controls or to play in the area of a gate system. 
4.  Access control devices must be placed far enough from moving gates to prevent the user from coming in contact with 

the gate while operating the controls.   

5.  All activating devices must be installed in a clear line-of-sight with the gate and its travel. 
6.  Activating devices must be installed a minimum of 10 feet away from the gate. 
7.  Outdoor or easily accessible controls shall have a security feature to prevent unauthorized use. 
8.  Be sure to mount all operating devices clearly out of reach of through gates. 

9.  DO NOT install this device unless all potential hazards and pinch points have been eliminated. 

 

DO NOT allow children to play near, on or with 

the gate, gate operator, or any of its controls. 

DO NOT mount operating devices accessible 

through the gate or in between gate and wall. 

Summary of Contents for FEB100-NT

Page 1: ...lling Refer to the manual and qualified personnel for assistance DO NOT install this device unless all entrapment and pinch points are eliminated Revision A FEB100 NT Free Exit Box No Touch Sensor Product Manual Installation Instructions Wiring Instructions ...

Page 2: ...gooseneck post 2 If the mounting holes are not used fill the holes with a plug or sealant to prevent water from entering the box Wall Mounting 1 Mount the system to a wall or flat surface Use appropriate mounting screws or anchors to securely attach the system 2 Never mount the system to a moving gate gate panel or next to a gate that causes vibration to the mounting point Continuous vibration fro...

Page 3: ...justment dial counter clockwise to decrease the time delay 3 Turning the adjustment dial fully clockwise to the end will put the sensor into a toggle mode TOGGLE MODE SETTING The time delay can be turned off and set to a toggle mode To set the Sensor in toggle mode 1 Turn the Time Delay Adjustment dial clockwise to the end SENSOR DETECTING DISTANCE ADJUSTMENT The IR Sensor detecting distance can b...

Page 4: ...can cause serious injury or death Read and follow all installation manuals reference manuals and warning label instructions 2 Vehicular gates are for vehicles only Pedestrians must use a separate entrance Keep all pedestrian traffic away from any vehicular gate No one should cross the path of a moving gate 3 Never allow children to operate or play with gate controls or to play in the area of a gat...

Reviews: