Access Interfacing Solutions BGR700 Product Manual Download Page 2

 

Page 

2

 of 

14 

Copyright © Access-IS 2017

 

Warnings 

This manual contains important information regarding the installation and operation of the BGR700 compact 
boarding pass reader. For safe and reliable operation of the imager, installers must ensure that they are 
familiar with, and fully understand, all instructions contained herein. 

Warranty 

Access Ltd warrants that this product shall be free from defects in workmanship and materials for a period of 
one year from the date of original purchase. If the product should fail to operate correctly in normal use during 
the warranty period, Access will replace or repair it free of charge. No liability can be accepted for damage 
due to misuse or circumstances outside Access' control. Access will not be responsible for any loss, damage 
or injury arising directly or indirectly from the use of this product. Access' total liability under the terms of this 
warranty shall in all circumstances be limited to the replacement value of this product. 

Radio Frequency Energy 

European EMC directive 89/336/EEC 

This product may cause interference if used in residential areas. Such use must be avoided unless 
the user takes special measures to reduce electromagnetic emissions to prevent interference to 
the reception of radio and television broadcasts.  

 

FCC Compliance Statement (United States) 

This equipment generates, uses and can radiate radio frequency energy and if not installed and used 
properly, that is, in strict accordance with the manufacturer's instructions, may cause interference to radio 
communication. It has been tested and found to comply with the limits for a class A computing device in 
accordance with the specifications in Subpart J of part 15 of FCC rules, which are designed to provide 
reasonable protection against such interference when the equipment is operated in a commercial 
environment. Operation of this equipment in a residential area may cause interference, in which case the user 
at his own expense will be required to take whatever measures may be necessary to correct the interference. 
Changes or modifications not expressly approved by the manufacturer could void the user's authority to 
operate the equipment.  

Canadian Department of Communications RFI statement 

This equipment does not exceed the class A limits for radio noise emissions from digital apparatus set out in 
the radio interference regulations of the Canadian Department of Communications. 

Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux 
appareils numériques de la classe A prescrites dans le règlement sur le brouillage radioélectriques publié par 
le ministère des Communications du Canada. 

 

 

Summary of Contents for BGR700















Reviews: