Page
10
of
16
Copyright © Access-IS 2018
6. On the
Choose Components
page, select the components to install.
If you do not want to integrate the software into another system and will therefore not require the
sample code, then you may clear the
Sample Code
check box.
7. Click
Next
.
8. On the
Choose Install Location
page, select the installation folder.
A default location is provided; to install to a different location, click
Browse
and select the folder
that you want to use.
9. Click
Install
to start installation.
Depending on your system's settings, a message may appear asking if you want to disable the
Certificate Propagation service. This service may affect the RFID operation of Access-IS
products with RFID functionality.
If you only use devices without RFID, such as the ADR100 and OCR31x, please select
No
. If, in
the future, you are planning to use an Access-ID RFID-enabled device, then please select
Yes
.
