Manual USB-IIRO-16 Family
8
Chapter 2: Installation
Software Installation
The software provided with this board is available by request on CD (see Optional
Accessories in the ordering guide) for a fee, or downloaded via the product page for free
and must be installed onto your hard disk prior to use.
Installing from Downloaded Installer
Download the software package here (
http://accesio.com/files/packages/USB-IIRO-
16%20Install.exe
) or from the Downloads tab on the product page.
Installing from CD
Perform the following steps as appropriate for your operating system. Substitute the
appropriate drive letter for your drive where you see D: in the examples below.
Windows
a. Place the CD into your CD-ROM drive.
b. The CD should automatically run the install program. If the install program does not run,
click START | RUN and type
, click OK or press
.
c. Follow the on-screen prompts to install the software for this board.
Linux
Please refer to linux.htm, and visit
https://github.com/accesio
for more.
Hardware Installation
The board can be installed in any USB 2.0 or USB 1.1 port. Please refer to the USB I/O
Quick Start Guide which can be found on the CD, for specific, quick steps to complete the
hardware and software installation.
