Manual USB-IIRO-16 Family
8
Chapter 2: Installation
Software CD Installation
These paragraphs are intended to detail the software installation steps as well as describe what is
being installed.
The software provided with this board is contained on one CD and
must be installed onto your
hard disk prior to use.
To do this, perform the following steps as appropriate for your operating
system. Substitute the appropriate drive letter for your drive where you see d: in the examples
below.
WIN98/Me/2000/XP/2003
a.
Place the CD into your CD-ROM drive.
b.
The CD should automatically run the install program. If the install program does not run,
click START | RUN and type
BGLQR?JJ
, click OK or press
-
.
c.
Follow the on-screen prompts to install the software for this board.
Hardware Installation
The board can be installed in any USB 2.0 or USB 1.1 port. Please refer to the USB I/O Quick Start
Guide which can be found on the CD, for specific, quick steps to complete the hardware and
software installation.
