manufactured by ACCES which is found to be defective will be
repaired or replaced subject to the following considerations:
GENERAL
Under this Warranty, liability of ACCES is limited to replacing,
repairing or issuing credit (at ACCES discretion) for any products
which are proved to be defective during the warranty period. In
no case is ACCES liable for consequential or special damage
arriving from use or misuse of our product. The customer is
responsible for all charges caused by modifications or additions to
ACCES equipment not approved in writing by ACCES or, if in
ACCES opinion the equipment has been subjected to abnormal
use. "Abnormal use" for purposes of this warranty is defined as
any use to which the equipment is exposed other than that use
specified or intended as evidenced by purchase or sales
representation. Other than the above, no other warranty,
expressed or implied, shall apply to any and all such equipment
furnished or sold by ACCES.
TERMS AND CONDITIONS
If a unit is suspected of failure, contact ACCES' Customer Service
department. Be prepared to give the unit model number, serial
number, and a description of the failure symptom(s). We may
suggest some simple tests to confirm the failure. We will assign a
Return Material Authorization (RMA) number which must appear
on the outer label of the return package. All units/components
should be properly packed for handling and returned with freight
prepaid to the ACCES designated Service Center, and will be
returned to the customer's/user's site freight prepaid and
invoiced.
COVERAGE
FIRST THREE YEARS:
Returned unit/part will be repaired and/or
replaced at ACCES option with no charge for labor or parts not
excluded by warranty. Warranty commences with equipment
shipment.
FOLLOWING YEARS
: Throughout your equipment's lifetime, ACCES
stands ready to provide on-site or in-plant service at reasonable
rates similar to those of other manufacturers in the industry.
EQUIPMENT NOT MANUFACTURED BY ACCES
Equipment provided but not manufactured by ACCES is warranted
and will be repaired according to the terms and conditions of the
respective equipment manufacturer's warranty.
TRADEMARKS
Tru-Iso
™ is a trademark of ACCES I/O Products, Inc., San Diego CA
92121-1506
DISCLAIMER
The information in this document is provided for reference only.
ACCES does not assume any liability arising out of the application
or use of the information or products described herein. This
document may contain or reference information and products
protected by copyrights or patents and does not convey any
license under the patent rights of ACCES, nor the rights of others.
PCI EXPRESS MINI CARD STANDARD NOTICE AND
EXCEPTION
The mPCI-ICM232-2 (two-port) device is fully compliant with PCI
Express Mini Card v1.2.
NOTICE:
The mPCIe-ICM232-4 (four-port) device exceeds the
component height limit on the bottom of the card. Depending on
the specific device, the components on the bottom of the card
may protrude between 1.0 and 1.3 millimeters further “down”
than the standard allows.
Please verify your intended host PC motherboard / adapter has not
located components within the 51x30mm footprint of the mPCIe
card.
ACCES I/O Products, Inc.
MADE IN THE USA
mPCIe-ICM232-4
5
manual revision B2g
