E:
P:
0800 126 826
www.accentworkspaces.co.nz
8
22 Hood Street
Wellsford, Auckland 0900
New Zealand
Corner Worksta5on
-with 3 End Legs
Parts list:
Balance End Leg (QTY: 3) Extendable Beam (QTY:2) Beam to Beam Connec5ng Bracket (QTY:1)
Includes 4 wood screws per leg. Includes 4 wood screws and 4 bolts per beam.
STEP 2: A'ach the Beam to Beam
connec5ng bracket to the front side
of the beam as per above.
STEP 4: A'ach the return leg beam to the
Beam to Beam connecter bracket as per
above.
STEP 1: A'ach the extendable beam to the
end legs. Make sure the beam is mounted
closer to the back of the legs. Open side of
the beam should face the front Use a ny-
lon hammer to hit the beam down into
place.
STEP 3: A'ach the other beam to
the return leg, as per above.
STEP 5: Extend the beams out to match the desk top sup-
plied, align the legs up with the front , back and ends of the
desk top, place the table top on to the frame, a'ach the
table top to the frame using the wood screws provided. In-
stall 2 bolts front and back of each beam as per above.