6
1.888.406.8906
The facts and figures herein are carefully compiled to the best of our knowledge and are intended for general informational purposes only. Responsibility
for the use and application of AccelTex Solutions materials rests with the end user. All AccelTex Solutions products are sold pursuant to the AccelTex
Solutions Terms and Conditions of Sale. © 2018 AccelTex Solutions. All Rights Reserved. AccelTex, AccelTex Solutions, the AccelTex Solutions Logo and
other marks are trademarks or registered trademarks of AccelTex Solutions.
ETHERNET SURGE SUPPRESSOR GUIDE
ATS-SS-70V-5KA-1GBPS-AT
Figure 9 - Attach Velcro Tape to Bottom of Suppressor
Velcro Install
The box comes with Velcro hook and loop tape to attach the suppressor to multiple surfaces.
Below are the components that will be needed for this install.
Directions
1. Wipe down and clean the surface intended for the suppressor. Pull off one side of the Velcro tape as to expose the adhe-
sive, and attach it, adhesive side down, to the surface.
2. Pull off remaining side of the Velcro tape as to expose the adhesive, and attach it, adhesive side down, to the bottom of
the suppressor (side with mounting bracket).
Figure 8 - Attach Velcro Tape to Surface
1
6
Figure 7 - Parts Required for Velcro tape Install