
20
Page of 25
energy at 288 kHz +/- 10 kHz for the purposes of wireless charging.
AcceleDent Optima
complies with the Bluetooth Low Energy (BLE) standard; it
transmits and receives electromagnetic energy through at 2.4 to 2.4835 GHz.
The band is split into 40 2 MHz channels. The maximum transmit power is
less than 1 mW.
10.13.1.3.
See IEC 60601-1-11 clause 4.2.3.1 for applicable conditions. This
device has been tested and found to comply with requirements for CISPR 11
Class B digital devices, which is designed to provide reasonable protection
against interference in a residential setting. However, there is no guarantee that
interference will not occur in a particular installation.
10.14. Electromagnetic Emissions
10.14.1.
The Activator is intended for use in the electromagnetic
environment specified below. The customer or the user of the unit should
assure that it is used in such an environment.
10.14.2.
In accordance with Clause 4.3 of IEC 60601-1,
AcceleDent Optima
does not have Essential Performance.
Emissions Test
Compliance
The
AcceleDent Optima
uses RF energy for internal
function and low power communication; therefore, its
RF emissions are very low and are not likely to cause
any interference in nearby electronic equipment.
RF Emissions
CISPR 11
Group 1
RF Emissions
CISPR 11
Class B
The system is suitable for use in all establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes.
Harmonic emissions
IEC61000-3-2
N/A
Voltage fluctuations
/ Flicker emissions
IEC61000-3-3
N/A
10.14.3.
Bluetooth Low Energy:
10.14.3.1.
Bluetooth, Bluetooth Low Energy, Bluetooth Smart and the
Bluetooth logo are registered trademarks of Bluetooth SIG.
10.15. Electromagnetic Immunity
10.15.1.
Electromagnetic Immunity Part 1
10.15.1.1.
The Activator is intended for use in the electromagnetic
environment specific below. The customer or the user of the Activator