6
Chapter 2: Basic Operation
Front Panel
Connect AC Power
Connect the AC power cord (included) to the TS200 first. Then plug the AC
power cord to the wall outlet. The TS200 input is universal and can accept
100V to 230V, 50Hz and 60Hz, line voltage.
Warning:
The AC power cord included in the TS200 is for North American
wall plug only. It is equipped with 3-wire grounding connection. The TS200
must be plug-in into a 3-wire outlet with proper grounding. For other regions,
proper power adopter with must be used. Make sure the adopter has proper
grounding connection.
Turn On Power
Turn on the device by press the LINE button to the “1” position. The LCD
screen will turn on. Note if the output is not enabled, the LCD will display
0.0V.
Warning:
To avoid potential damages to external circuits connected to the
output terminals, preset the output voltage before turn on the device (see below).