Section 3 Installation
Here we simply take ARS-2160H to demonstrate.
1. Remove the 4 screws of ARS-2160H and open the upper case.
2. Slide the 2.5'' SATA hard drive along the sides of ARS-2160H till it connects CN16.
3. Fix the SATA hard drive to the two sides of ARS-2160H with the enclosed 4 screws.
5. Set the jumper, and connect CN6 of ARS-2160H to the host SCA2 80-pin connector.
4. Return the upper cover of the bridge and fix with the 4 screws.
