8
ARS-2017E Manual
2.5 Dimension & Temperature
Dimension
Length: 28cm / Width: 18cm / Height: 19cm
Temperature
–
5°C ~ 60°C for non-operation
0°C ~ 40°C for operation (not condensed)
2.6 Package
Open the package of ARS-2017E, and check its contents. If there is anything missing,
contact your distributor.
n
ARS-2017E
×
1
n
Support CD (firmware, utility)
×
1
n
User’s manual
×
1
n
Power cord
×
1
n
Plastic stick (to loosen the tray’s handle)
×
2
n
External Ultra160 SCSI LVD cable
×
1
n
External Ultra160/320 terminator
×
1 (optional)
n
AEC-67160/67162 Ultra160 SCSI adapter
×
1 (optional)
2.7 Quick Start
Step 1
: Prepare 2 hard drives of the same model, and set the jumper as
Cable Select or Single/Master mode.
Step 2
: Take the 2 trays out of ARS-2017E.
Step 3
: Put a hard drive into each tray, and connect it with the internal IDE cable
and power cord. Fasten the hard drive with screws.
Step 4
: Put the 2 trays back to ARS-2017E.
Step 5
: Make sure that the auto-eject handles on the trays are closed.
Step 6
: Set a proper and unique SCSI ID for ARS-2017E (on page 27).
Step 7
: Connect ARS-2017E to the SCSI card with a SCSI cable. And be sure to
add a terminator to the end. See Chapter 4 for the connection.
Step 8
: Connect ARS-2017E with a power cord.