AEC-6896S/6896 Manual
7
Chapter 2 Hardware Installation
2.1 Quick Installation
2.2 The Board Layout
The layout of AEC-6896 board is shown as follows.
From this chapter on we simply take AEC-6896 to explain installation, etc.
(1). Be sure that the system power has been off.
(2). Open the housing of PC.
(3). Insert AEC-6896 into an available PCI slot firmly.
(4). Screw AEC-6896 onto the housing.
(5). Connect AEC-6896 to the Serial hard drive with a Serial ATA cable (and an IDE-
to-SATA converter if the hard drive is an IDE one).
(6). Screw the housing and power on the system.
NOTICE: If you use a converter, please connect the large 4-pin power
cord to the hard drive, and the small 4-pin one to the converter.
Figure 2-1