After recording is stopped, system will prompt that the firmware uploading is successful; as
shown in the following picture. Press OK to confirm it.
Step 3
: After complete, press ''Pre-Check'' to certify the firmware document; after the
certification is complete, a prompt window will jump out stating that the certification work is
successful. Press OK to confirm it.
Step4
: Next, press “Burn” to start updating the firmware.
Warning: during the firmware-updating process, do not offline or turn off the browser; other
wise, it would cause error within the firmware-updating process that results in unable to
boot normally.
After the firmware updating is successful, a prompt window will jump out stating that the
certification work is successful. Press OK to confirm it.
51
