Acapella Violon 2001, Instruction Manual, Page: 6 / 10

Control panel
1. Level control
2. Input RCA jack
3. Mode switch (manual/automatic)
4. Fuse F1 0,4A slo-blo
5. Fuse F2 1,2A slo-blo
6. Fuse F3 0,1A slo-blo
7. AC connector with phase identification
8. Hand marked serial number
Getting started
Bring the mode switch on the rear panel of the unit to the „automatic“
position. Connect the AC cord to the ion tweeter first and then to the
electrical outlet. Now you can hear the soft switch-on sound of a relay.
Move the mode switch quickly into the „manual“ mode and bring it
immediately back to its original position. The „reset“ function has now been
initialised. This gives time to the oscillator’s valve for a warm-up. The
„reset“ function can also be used for future switch off of the ion tweeter
(only with no incoming signal).
After an approx. 60 seconds warm-up tip the switch over into the „manual“
position. 3 seconds later you can hear the switch-on sound of the relay
and a short period later a second „click“, which indicates the beginning
of the quick warm-up of the combustion chamber. After another 5 seconds
period you hear a third „click“, announcing the end of the combustion
chamber’s warm up phase. The ion tweeter is now ready for operation.