Network Configuration
Acano solution: Installation Guide 76-1002-04-D
Page 15
4.4 Configuring the Web Interface for HTTPS Access
You can configure the Web Admin Interface to use any or all of the five Ethernet interfaces.
32. Establish a SSH connection again to the MMP of the Acano Server and sign in.
33. Enter the following commands to configure the Web Admin Interface to use the Ethernet
interface labeled Admin:
webadmin certs webserver.key webserver.crt
webadmin listen mmp 443
webadmin enable
Note: Be sure to use the same names as the certificates you uploaded in section 4.3
34. Test that you can access the Web Admin Interface of the Acano Server using the MMP user
account that you created
earlier
, i.e. enter https:\\acanoserver.mycomany.com in your
browser and login using the user account you created in step 3.
You are now ready to configure the Acano Server. See the Deployment Guide for details.
When you want to power off the Acano Server be sure to sign into the MMP and use the
shutdown
command before you power off.
