JetStor SAS 742FD RAID Subsystem
User Manual
39
To install a SAS disk drive (Single or Dual Controller Mode) or SATA disk
drive (Single Controller Mode) in a disk tray:
1.
Use the Key for Disk Tray Lock to unlock a disk tray.
2.
Place the disk drive into the disk tray.
3.
Turn the disk tray upside down. To secure the disk drive into the disk tray,
tighten 4 screws on the holes of the disk tray. Note in the picture below where
the screws should be placed in the disk tray holes.
4 screws #6-32 UNC L=5.0mm
