ASSEMBLY INSTRUCTIONS
Never use soap or cleaning agents on the AcalaQuell cartridge or microsponge and lime filter!
Do not use boiling water and do not put any parts of the system into the dishwasher! Touch
the filter cartridge, microsponge and lime filter only with clean hands or with household
gloves, in order to maintain the hygienic conditions!
Use only a soft cloth when cleaning to avoid scratches on the plastic!
Take off all the packaging from the filter and the filter cartridge. Clean the container and other
parts of the system (apart from all filters) with a mild soap or detergent and rinse it afterwards
with clean water.
If possible soak the cartridge under running cold water for about a minute until no more
carbon dust comes out.
Our materials are free from glue, our high-performance activated carbon and mineral rocks
are poured, they are thus loose in the cartridge. They can loosen during the transport, this is
completely harmless and this is washed out by rinsing.
Please remove the upper tank and push the cartridge with the narrow side at the head through
the round opening in the upper tank. Push the cartridge down with the narrow side, and insert
the cartridge with a screwing motion so deeply, until the cartridge seal sits on the base (see the
picture).
AcalaQuell
Base
© 2016 Acala GmbH
3/9
