1. Prior to using your Orion Mini for the first time you should rinse and clean the bean hopper in warm
soapy water. Dry immediately after cleaning.
2. Attach the bean hopper on top.
3. Place a container on the weighing platform to avoid accidental dispensing.
4. Connect the power cord to the Orion Mini.
5. Place coffee beans into the hopper.
1. Make sure that the weighing platform is clean.
2. Turn on the Orion Mini by pressing Power and place the container on the platform.
3. Set target weight by short pressing Power. Adjust values with Dial then short press Power to
confirm.
4. Press Dose to start dosing. If the display shows [
CUP
] [
rESEt
] , please place a container on
the platform.
5. When a dose is complete, press Power to return to dosing.
The Orion Mini is designed for dosing portions of beans from 5 grams to a maximum of 3000
grams per dose with an accuracy of +/- 2 beans (~0.5 g).
There are two dosing modes in the Orion Mini — Manual mode and Auto mode. To choose be-
tween modes, long press the Power button and the display will show the current mode of opera-
tion. Rotate the dial to switch modes.
Getting Started
Initial Setup
Getting Started
General Operation
4
To take full advantage of the Orion Mini’s many features, carefully read through the entire manual,
which contains step-by-step procedures, examples, and other information.
Warning: Incorrect handling of this product could result in personal injury or physical damage.
