Weighing Resolution Setting [
rESoL
]
1. The default Weighing Resolution is set to [
dEFAUL
]: the division is 0.1 g /0.002 oz.
2. Tap tare button to switch the weighing resolution between [
dEFAUL
] and [
hiGh
].
3. When the Weighing Resolution is set to high, division will be 0.01 g/0.0005 oz. The default
display will show [
0
.
00
] when the scale is set to grams, and [ 0.0000 ] for ounces in Weighing
Mode.
4. Press and hold tare button for 1 second until [
NoDE_1
] is shown on the LED to confirm the
selected option.
5. Note: After setting Weighing Resolution to high, the default display will show [
0
:
00
0
.
00
] with
timer in Dual Display Mode and Auto Start Modes.
Weighing Only Mode Setting [
NoDE_1
]
1. The default Weighing Only Mode Setting is set to ON, which means this mode is enabled.
2. ON: The Weighing Mode is enabled.
3. OFF: The Weighing Mode is disabled.
4. Press and hold tare button for 1 second until [
NoDE_2
] is shown on LED to confirm the
selected option.
Dual Display Mode Setting [
NodE_2
]
1. By default, the Dual Display Mode Setting is set to ON, which means this mode is enabled.
2. ON: The Dual Display Mode is enabled.
3. OFF: The Dual Display Mode is disabled.
4. Press and hold tare button for 1 second until [
NoDE_3
] is shown on LED to confirm the
selected option.
Timer Starts with Flow Mode Setting [
NodE_3
]
1. By default, the Timer Starts with Flow Mode with Droplet Setting is set to ON, which means this
mode is enabled.
2. ON: The Timer Starts with Flow Mode with Droplet is enabled.
3. OFF: The Timer Starts with Flow Mode with Droplet is disabled.
4. Press and hold tare button for 1 second until [
NoDE_4
] is shown on LED to confirm the
selected option.
Chapter 4: Configuration 25
