1. Switch into automatic dosing mode by pressing and holding
Power
and selecting the Auto mode
with the
Dial
. Press
Power
again to confirm the mode.
2. Select or adjust a preset weight.
3. Press
Dose
to start automatic dosing, the display will show
[ rEADY ]
.
4. To start the first dose, press
Dose
again and the automatic dosing will begin.
5. Remove the completed dose, and wait for the display to show
[ rEADY ]
again.
6. Place another container on top of the platform and dispensing will start again.
7. Press
Power
to set a different dose and leave the current auto dosing session.
• Auto dosing mode can dose automatically whenever a container is placed on the platform.
• There will be an ‘A’ indicator on the top left corner of the display when in Auto mode.
• A
[ NOISE ]
message will show when a container is removed from the Orion or the platform is
touched during dosing. Please dose again.
Pulse in Auto dosing mode
The pulse function also works in the auto dosing mode. To pulse (or add) a few more beans at the
end of each dose, simply press the
Dose
button and the Orion will add a small amount of beans with
each press. If one press does not dispense any beans, you can press it multiple times until the desired
weight is reached.
Auto dosing mode can dose automatically whenever a container is placed on the platform. There
will be an ‘A’ indicator on the top left corner of the display when in Auto mode.
At the end of auto dosing, you may press the
Dose
button to ‘pulse’ a few more coffee beans if
r
equired. A [ rEADY ] message will show on the display when auto dosing mode is in action.
To leave the [ rEADY ]
display, press the
Power
button. You will be able to return to the preset
selection display.
Mode 2 - Auto Dosing Mode
8
Action
Operation
Enter Ready State
Press
Dose
Start Dosing
Press
Dose
Stop Dosing
Press
Dose
Pulse Beans
Press
Dose
Reset Mode
Press
Power
Display
Description
rEADY
Place container on the platform; dosing will start when weight is
detected
