DA-810DSP Special DSP amplifier
16
3. Software Operation
User Manual
speaker. Figure 3.3.5 as follows:
Figure 3.3.5
The system will be based on the user has selected the type of output signal path,
the shielding portion of the signal path type option (as a shadow, the user is not
optional). Specific options are:
Front 》 left, right 》 high/ mid/ low/ mid-high/ mid-low/ and full frequency
Rear 》 left, right 》 high/ low/ and full frequency
Center 》high-frequency, low frequency and full frequency
Super low 》 left super low, right super-low and super-low
The third step,
after the user has configured all of the output signal path, click on the
right side of Figure 3.3.4 "Lock Output Configuration" to lock the configured output
channel speaker sound field position. So that users and then in the bottom of each
channel label, click on the type of drop-down menu box, type options will not pop
up.
the output delay adjustment, is set in the delay space area to the left of the
illustrated adjustment, as follows (Figure 3.3.6), click on the value of the input box
next to the corresponding speaker can be entered after the delay value
corresponding units.
Figure 3.3.6