![background image](http://html1.mh-extra.com/html/aca-digital-corporation/rf1100/rf1100_user-manual_3572429005.webp)
RF1100 User Guide
3
If your laptop does not have a CF or PCMCIA card slot, you need
to connect a multi-slot card reader to the laptop, then insert the
RF1100 reader into the CF slot as shown.
Installing the RF1100 Driver on a Laptop
Before using the RF1100 RFID reader on a laptop with Windows
2000/XP/XP Embedded installed, you need to install a software
driver onto the computer first. Follow the steps below to start
the installation:
1. Make sure that the PDA synchronization software (Active-
Sync suggested) is installed on your laptop.
2. Insert the RF1100 RFID reader into the CF or PCMCIA (via
adapter) card slot of the laptop.
If you have purchased HT1100 and would
like to use with RF1100. See HT1100 User
Manual for the assembly instructions.
Card
reader
Note