a. The air intake side should face up when using
a vacuum cleaner.
b. The air intake side should face down when
using clean water.
For excessive dusts, use a soft brush and natural
detergent to clean it and dry in a cool place.
CAUTION
4. Re-install the air filter.
5. Press “UP” button on the remote controller to
reset the air grille. (Applicable to model A)
Re-install the air grille by fixing the two screws
and close the two screw covers.
(Applicable to model B)
• Do not dry out the air filter under direct
sunshine or with fire.
• The air filter should be installed before the
unit body installation.
a. Hold the upper edge of the filter with both
hands. Gently turn and lift until the upper edge
is free from the wire rope.
b. Lift the filter and move it forward slightly until
the filter is separated from the 4 wire ropes.
c. Move the filter to the right until it is separated
from the air grille , and then the filter can be
taken out.
a
b
c
Page 13
Care and
Maintenance
3. Clean the air filter
Dusts will accumulate on the filter along with
the unit operation, and need to be removed from
the filter,or the unit would not function effectively.
Clean the filter every two weeks when you use
the unit regularly.
Clean the air filter with a vacuum cleaner or
water.
Model B
1. Press the circular positon to open the two
screw covers, then remove the two screws.
2.Hold and open the air grille, then take out the
air filter.
Screw Cover
air filter
