AC Infinity ONGRID Series, User Manual

Page: 26 / 32

26
CONTROLLER LOCK
Holding the setting button will lock the controller in your cur-
rent mode. While your controller is locked, no parameters may
be adjusted nor will you be able to switch modes. Holding the
power button again will unlock the controller.
FACTORY RESET
Holding the mode, up, and down buttons together for 5
seconds will reset the controller and restore factory settings.
This will clear all user parameters in each controller mode
and setting.
AUTO INCREASING OR DECREASING
Holding the up or down button will increase or decrease the
user setting automatically until you release them.
HIDE SCREEN
Lock the controller so no settings can be adjusted. See above.
Then press the setting button to turn the display off. Pressing
the setting button again will turn the display back on. Pro-
grams will still run in the background while the screen is off.
T-SERIES
OTHER SETTINGS
JUMP TO OFF MODE
Holding the mode button for 3 seconds while in any mode or
setting will automatically jump to OFF Mode. This function is
disabled if the controller is locked.
HOLD +
HOLD +
PRESS +
SET MODE PARAMETER TO OFF
Holding the up and down buttons together for 2 seconds will
reset the value of the current mode to OFF, 0 or - - :- -. Press-
ing either the up or down button will return the parameter to
the mode’s last setting.
HOLD +
HOLD +
HOLD +
HOLD +