AC Infinity AC-CRT10, User Manual

Page: 27 / 40

27
PROGRAMMING
SCHEDULE MODE (ON AND OFF)
In this mode, set an on clock-time and an off clock-
time schedule for the fan to follow through daily.
Press the up or down button to first set up an on
clock-time for when the fan will be on and then press
the mode button again, to set an off clock-time for
when the fan will be off. When the fan is triggered to
be on, it will run at the speed set in ON Mode. When
the fan is triggered to be off, it will run at the speed
set in OFF Mode. Please be sure to set the current
clock time under settings.
The countdown will begin if no buttons are pressed
for 5 seconds. The time left on the countdown before
the next on or off phase is shown on the display, in
the section below the current fan speed. The fan will
not follow this schedule if you leave this mode. If you
reenter the schedule mode, it will continue to follow
the latest schedule you have set.
TO
ON
TO
ON
If there is a speed set in OFF Mode other
than zero, the fans will run at that speed
when triggered to turn off.
ADV. MODE
Advanced programs are automation, alarm, and/
or notification settings created in the AC Infinity
controller app. Its icon will display when an advanced
program is set but not triggered. “ADV” will appear
when an automation advanced program is activated.
All other icons and modes will disappear to indicate
the program is overriding the controller’s modes
and settings. Manually adjusting the controller will
deactivate the advanced programming until it is
triggered again.